Electric Motor Driven Centrifugal Pumps

Showing 1–16 of 18 results

Category Products

General Products

  • 0 out of 5

    3″ Pacer T Series Slurry Pump – 415V

    • 20m max head
    • 1300 Lpm max flow
    • Self-priming (after initial priming)
    • 415 Volt 5.5 Hp 2800 Rpm motor
    • Polyester body, BUNA seals
    • 3" female pump inlet
    • 3" female pump outlet
    • Carbon ceramic mechanical seal
    • Urethane coated impeller & volute
    • Suitable for dirty water w/...
    • ...soft suspended solids & sea water
    £1,438.58 £1,366.65
    • 20m max head
    • 1300 Lpm max flow
    • Self-priming (after initial priming)
    • 415 Volt 5.5 Hp 2800 Rpm motor
    • Polyester body, BUNA seals
    • 3″ female pump inlet
    • 3″ female pump outlet
    • Carbon ceramic mechanical seal
    • Urethane coated impeller & volute
    • Suitable for dirty water w/…
    • …soft suspended solids & sea water
    Quick View
  • 0 out of 5

    AS2 Automatic Float Switch

    • 12/24 Volts DC
    • 10 Amps max
    • 55/25mm on/off water level
    • Mercury free
    • 850mm cable
    • 113L x 83W x 62H (mm)
    £22.68 £19.28
    • 12/24 Volts DC
    • 10 Amps max
    • 55/25mm on/off water level
    • Mercury free
    • 850mm cable
    • 113L x 83W x 62H (mm)
    Quick View
  • 0 out of 5

    BK200M Twin Impeller Centrifugal Pump

    • 54.5m max head
    • 150 Lpm max flow
    • Non self-priming
    • 230 Volt 2 Hp electric motor
    • Cast iron body, nitrile seals
    • 1"1/2 female pump inlet
    • 1" female pump outlet
    • Carbon ceramic mechanical seal
    • Stamped brass twin impeller
    • For clear water up to 90°C
    £372.94 £317.00
    • 54.5m max head
    • 150 Lpm max flow
    • Non self-priming
    • 230 Volt 2 Hp electric motor
    • Cast iron body, nitrile seals
    • 1″1/2 female pump inlet
    • 1″ female pump outlet
    • Carbon ceramic mechanical seal
    • Stamped brass twin impeller
    • For clear water up to 90°C
    Quick View
  • 0 out of 5

    Counterweight

    • Shock resistant polystyrene
    • Sand filled
    • 48ø x 59L, mm
    • 130 grams
    £6.25 £5.31
    • Shock resistant polystyrene
    • Sand filled
    • 48ø x 59L, mm
    • 130 grams
    Quick View
  • 0 out of 5

    Faes Techno Float Switch

    • 0.4 metre PVC 3 wire cable
    • 250V - 50/60Hz - 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    £10.42 £8.86
    • 0.4 metre PVC 3 wire cable
    • 250V – 50/60Hz – 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    Quick View
  • 0 out of 5

    Faes Techno Float Switch

    • 3 metre PVC 3 wire cable
    • 250V - 50/60Hz - 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    £15.63 £13.29
    • 3 metre PVC 3 wire cable
    • 250V – 50/60Hz – 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    Quick View
  • 0 out of 5

    Faes Techno Float Switch

    • 10 metre PVC 3 wire cable
    • 250V - 50/60Hz - 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    £33.34 £28.34
    • 10 metre PVC 3 wire cable
    • 250V – 50/60Hz – 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    Quick View
  • 0 out of 5

    Faes Techno Float Switch

    • 5 metre PVC 3 wire cable
    • 250V - 50/60Hz - 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    £23.96 £20.37
    • 5 metre PVC 3 wire cable
    • 250V – 50/60Hz – 20(8) Amps
    • 60°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene Atox shell
    • Suitable for filling or emptying
    • Supplied with counterweight
    Quick View
  • 0 out of 5

    Hypro Aqua Tiger Pump

    • 0.48 Bar max pressure
    • 72 Lpm max flow
    • Non self-priming
    • 12 Volt DC 11 Amp electric motor
    • Bronze impeller & head
    • Viton lip seal & O rings
    • 3/4" female pump inlet
    • 3/4" female pump outlet
    • 60°C max fluid temperature
    £384.34 £326.69
    • 0.48 Bar max pressure
    • 72 Lpm max flow
    • Non self-priming
    • 12 Volt DC 11 Amp electric motor
    • Bronze impeller & head
    • Viton lip seal & O rings
    • 3/4″ female pump inlet
    • 3/4″ female pump outlet
    • 60°C max fluid temperature
    Quick View
  • 0 out of 5

    Hypro Aqua Tiger Pump

    • 0.48 Bar max pressure
    • 72 Lpm max flow
    • Non self-priming
    • 12 Volt DC 11 Amp electric motor
    • AISI 316 st.steel impeller & head
    • Viton lip seal & O rings
    • 3/4" female pump inlet
    • 3/4" female pump outlet
    • 60°C max fluid temperature
    £364.02 £309.42
    • 0.48 Bar max pressure
    • 72 Lpm max flow
    • Non self-priming
    • 12 Volt DC 11 Amp electric motor
    • AISI 316 st.steel impeller & head
    • Viton lip seal & O rings
    • 3/4″ female pump inlet
    • 3/4″ female pump outlet
    • 60°C max fluid temperature
    Quick View
  • 0 out of 5

    JB150M Centrifugal Pump

    • 64m max head
    • 80 Lpm max flow
    • Self-priming, suction up to 8m
    • 230 Volt 1.5 Hp electric motor
    • Cast iron body, nitrile seals
    • 1"1/2 female pump inlet
    • 1" female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    £355.04 £301.78
    • 64m max head
    • 80 Lpm max flow
    • Self-priming, suction up to 8m
    • 230 Volt 1.5 Hp electric motor
    • Cast iron body, nitrile seals
    • 1″1/2 female pump inlet
    • 1″ female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    Quick View
  • 0 out of 5

    JB150M Centrifugal Pump

    • 64m max head
    • 80 Lpm max flow
    • Self-priming, suction up to 8m
    • 415 Volt 1.5 Hp electric motor
    • Cast iron body, nitrile seals
    • 1"1/2 female pump inlet
    • 1" female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    £386.86 £328.83
    • 64m max head
    • 80 Lpm max flow
    • Self-priming, suction up to 8m
    • 415 Volt 1.5 Hp electric motor
    • Cast iron body, nitrile seals
    • 1″1/2 female pump inlet
    • 1″ female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    Quick View
  • 0 out of 5

    JB200M Centrifugal Pump

    • 60.9m max head
    • 120 Lpm max flow
    • Self-priming, suction up to 8m
    • 230 Volt 2 Hp electric motor
    • Cast iron body, nitrile seals
    • 1"1/2 female pump inlet
    • 1" female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    £373.45 £317.43
    • 60.9m max head
    • 120 Lpm max flow
    • Self-priming, suction up to 8m
    • 230 Volt 2 Hp electric motor
    • Cast iron body, nitrile seals
    • 1″1/2 female pump inlet
    • 1″ female pump outlet
    • Carbon ceramic mechanical seal
    • Techno polymer impeller
    • For clear water up to 60°C
    Quick View
  • 0 out of 5

    MAC5 Heavy Duty Float Switch

    • 10 metre PVC 3 wire cable
    • 250V - 10(3) Amps
    • 50°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene shell
    • Suitable for filling or emptying
    • Integrated counterweight
    • Double liquid proof chamber
    • Suitable for sewage/industrial use
    £91.68 £77.93
    • 10 metre PVC 3 wire cable
    • 250V – 10(3) Amps
    • 50°C max temperature
    • Rated to IP68
    • +/- 45° switching angle
    • Polypropylene shell
    • Suitable for filling or emptying
    • Integrated counterweight
    • Double liquid proof chamber
    • Suitable for sewage/industrial use
    Quick View
  • 0 out of 5

    Odina100M Centrifugal Pump

    • 66m max head
    • 50 Lpm max flow
    • Non self-priming
    • 230 Volt 1 Hp electric motor
    • Cast iron body, nitrile seals
    • Patented ABS Anti-Blocking System
    • 1" female pump inlet
    • 1" female pump outlet
    • Carbon ceramic mechanical seal
    • Stamped brass impeller
    • For clear water up to 90°C
    £135.25 £114.96
    • 66m max head
    • 50 Lpm max flow
    • Non self-priming
    • 230 Volt 1 Hp electric motor
    • Cast iron body, nitrile seals
    • Patented ABS Anti-Blocking System
    • 1″ female pump inlet
    • 1″ female pump outlet
    • Carbon ceramic mechanical seal
    • Stamped brass impeller
    • For clear water up to 90°C
    Quick View
  • 0 out of 5

    PM50 Volumetric Pump

    • 34m max head
    • 35 Lpm max flow
    • Non-self-priming
    • 230 Volt - 0.5 Hp - 2.9 Amps
    • Cast iron body & support
    • 1" female pump inlet
    • 1" female pump outlet
    • Ceramic graphite mechanical seal
    • Brass impeller
    • For clear water up to 40°C
    • Continuous duty
    £68.91 £58.57
    • 34m max head
    • 35 Lpm max flow
    • Non-self-priming
    • 230 Volt – 0.5 Hp – 2.9 Amps
    • Cast iron body & support
    • 1″ female pump inlet
    • 1″ female pump outlet
    • Ceramic graphite mechanical seal
    • Brass impeller
    • For clear water up to 40°C
    • Continuous duty
    Quick View