Oil Transfer Pumps
Showing all 5 results
Category Products
General Products
-
Jabsco 110V P40 Oil Transfer Pump
- 1.5 Bar max pressure
- 20 Lpm max flow
- 110V, 1ph, 50 Hz, 0.3kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor - IP55
- Up to 30min run dry protection
- 1" BSPF ports
Quick View- 1.5 Bar max pressure
- 20 Lpm max flow
- 110V, 1ph, 50 Hz, 0.3kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor – IP55
- Up to 30min run dry protection
- 1″ BSPF ports
-
Jabsco 230V P40 Oil Transfer Pump
- 1.5 Bar max pressure
- 20 Lpm max flow
- 230V, 1ph, 50 Hz, 0.3kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor - IP55
- Up to 30min run dry protection
- 1" BSPF ports
Quick View- 1.5 Bar max pressure
- 20 Lpm max flow
- 230V, 1ph, 50 Hz, 0.3kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor – IP55
- Up to 30min run dry protection
- 1″ BSPF ports
-
Jabsco 24VDC P40 Oil Transfer Pump
- 1.5 Bar max pressure
- 20 Lpm max flow
- 24V DC 0.3kW 17A motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor - IP55
- Up to 30min run dry protection
- 1" BSPF ports
Quick View- 1.5 Bar max pressure
- 20 Lpm max flow
- 24V DC 0.3kW 17A motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor – IP55
- Up to 30min run dry protection
- 1″ BSPF ports
-
Jabsco 400V P40 Oil Transfer Pump
- 1.5 Bar max pressure
- 20 Lpm max flow
- 400V, 3ph, 50 Hz, 0.37kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor - IP55
- Up to 30min run dry protection
- 1" BSPF ports
Quick View- 1.5 Bar max pressure
- 20 Lpm max flow
- 400V, 3ph, 50 Hz, 0.37kW motor
- Self-priming, suction up to 3m
- Bronze body, st.steel shaft
- Nitrile impeller & seals
- Fluids up to 1000cSt viscosity
- Handles hard & soft solids up to 4mm
- 10 to 90°C working temperature
- Continuously rated motor – IP55
- Up to 30min run dry protection
- 1″ BSPF ports
-
Marco UP12/OIL Gear Pump
- 3 Bar max pressure
- 15 Lpm max flow
- 12 Volt DC, 15 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- BUNA seals & O rings
- 80°C max fluid temperature
- 2m max suction
- 1/2"BSP female ports
- With 2x 16mm brass hose barbs
Quick View- 3 Bar max pressure
- 15 Lpm max flow
- 12 Volt DC, 15 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- BUNA seals & O rings
- 80°C max fluid temperature
- 2m max suction
- 1/2″BSP female ports
- With 2x 16mm brass hose barbs