Pumping Equipment
Showing 145–160 of 515 results
Category Products
General Products
-
Flojet-Totton NEMP80/6 Magnetic Drive Pump
- 5.5m max head
- 80 Lpm max flow
- 230V, 50 Hz, 0.06kW motor
- Seal-less centrifugal pump
- Entirely non-metallic
- Polypropylene pump housing
- Alumina ceramic spindle
- Viton O ring
- 3/4"BSP male ports
- Rated to IPX5
Quick View- 5.5m max head
- 80 Lpm max flow
- 230V, 50 Hz, 0.06kW motor
- Seal-less centrifugal pump
- Entirely non-metallic
- Polypropylene pump housing
- Alumina ceramic spindle
- Viton O ring
- 3/4″BSP male ports
- Rated to IPX5
-
Formula Press Automatic Pump Controller
- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 10 Amps
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1" male ports
- Must be mounted vertically
Quick View- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 10 Amps
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1″ male ports
- Must be mounted vertically
-
Formula Press Automatic Pump Controller
- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 10 Amps
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1" male ports
- Must be mounted vertically
- SUPPLIED WITH LEADS
Quick View- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 10 Amps
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1″ male ports
- Must be mounted vertically
- SUPPLIED WITH LEADS
-
Formula Press Automatic Pump Controller
- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 16 Amps, 2.2kW
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1" male ports
- Must be mounted vertically
- SUPPLIED WITH LEADS
Quick View- Auto stop/start for centrifugal pumps
- For clean water up to 60°C
- 230 Volts, 16 Amps, 2.2kW
- 1.5-10 Bar pump pressure
- 1.5 Bar starting pressure
- Integrated check valve
- Integrated pressure gauge
- 10000 Lph max flow
- Protection to IP65
- 1″ male ports
- Must be mounted vertically
- SUPPLIED WITH LEADS
-
Honda WB20 Water Pump in Carry Frame
- 3.2 Bar max pressure
- 32m max head
- 620 Lpm max flow
- Suction up to 7.5m (after priming)
- Honda GX120 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2" pump ports
- Handles suspended solids up to 6mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 3.2 Bar max pressure
- 32m max head
- 620 Lpm max flow
- Suction up to 7.5m (after priming)
- Honda GX120 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2″ pump ports
- Handles suspended solids up to 6mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WB30 Water Pump in Carry Frame
- 2.3 Bar max pressure
- 23m max head
- 1100 Lpm max flow
- Suction up to 7.5m (after priming)
- Honda GX160 petrol
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 3" pump ports
- Handles suspended solids up to 6mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 2.3 Bar max pressure
- 23m max head
- 1100 Lpm max flow
- Suction up to 7.5m (after priming)
- Honda GX160 petrol
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 3″ pump ports
- Handles suspended solids up to 6mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WH15 Water Pump with Carry Handle
- 4 Bar max pressure
- 40m max head
- 370 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX120 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1"1/2 pump ports
- Handles suspended solids up to 3mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 4 Bar max pressure
- 40m max head
- 370 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX120 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1″1/2 pump ports
- Handles suspended solids up to 3mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WH20 Water Pump in Carry Frame
- 5 Bar max pressure
- 50m max head
- 450 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX160 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2" pump ports
- Handles suspended solids up to 3mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 5 Bar max pressure
- 50m max head
- 450 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX160 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2″ pump ports
- Handles suspended solids up to 3mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WT20 Trash Water Pump in Carry Frame
- 2.6 Bar max pressure
- 26m max head
- 700 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX160 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2" pump ports
- Handles suspended solids up to 24mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 2.6 Bar max pressure
- 26m max head
- 700 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX160 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 2″ pump ports
- Handles suspended solids up to 24mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WT30 Trash Water Pump in Carry Frame
- 2.5 Bar max pressure
- 25m max head
- 1200 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX270 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 3" pump ports
- Handles suspended solids up to 28mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 2.5 Bar max pressure
- 25m max head
- 1200 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX270 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 3″ pump ports
- Handles suspended solids up to 28mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WT40 Trash Water Pump in Carry Frame
- 2.5 Bar max pressure
- 25m max head
- 1600 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX390 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 4" pump ports
- Handles suspended solids up to 31mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 2.5 Bar max pressure
- 25m max head
- 1600 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX390 petrol engine
- Aluminium body, BUNA seals
- Carry frame with anti-vibration rubbers
- 4″ pump ports
- Handles suspended solids up to 31mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WX10 Water Pump with Carry Handle
- 3.7 Bar max pressure
- 37m max head
- 120 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX25 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1" pump ports
- Handles suspended solids up to 5.7mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 3.7 Bar max pressure
- 37m max head
- 120 Lpm max flow
- Suction up to 8m (after priming)
- Honda GX25 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1″ pump ports
- Handles suspended solids up to 5.7mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda WX15 Water Pump with Carry Handle
- 4 Bar max pressure
- 40m max head
- 280 Lpm max flow
- Suction up to 8m (after priming)
- Honda GXH50 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1"1/2 pump ports
- Handles suspended solids up to 5.7mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
Quick View- 4 Bar max pressure
- 40m max head
- 280 Lpm max flow
- Suction up to 8m (after priming)
- Honda GXH50 petrol engine
- Aluminium body, BUNA seals
- Baseplate with carry handle
- 1″1/2 pump ports
- Handles suspended solids up to 5.7mm
- Cast iron volute & impeller
- Silicon carbide mechanical seal
- With port couplings & suction filter
-
Honda/Interpump Petrol Engine Pump Unit
- 140 Bar max pressure
- 12 Lpm max flow
- Honda GX160, recoil start
- Interpump W140 pump & gearbox
- Mounted on baseplate
- 60°C max fluid temperature
- Unloader valve - 3/8"BSPF outlet
- Inline suction filter - 3/4" hose barb
- Return to tank bypass - 15mm hose barb
- 620L x 400W x 360H, mm. 37Kg
- Not supplied with lance/hoses
Quick View- 140 Bar max pressure
- 12 Lpm max flow
- Honda GX160, recoil start
- Interpump W140 pump & gearbox
- Mounted on baseplate
- 60°C max fluid temperature
- Unloader valve – 3/8″BSPF outlet
- Inline suction filter – 3/4″ hose barb
- Return to tank bypass – 15mm hose barb
- 620L x 400W x 360H, mm. 37Kg
- Not supplied with lance/hoses
-
Honda/Interpump Petrol Engine Pump Unit
- 150 Bar max pressure
- 14 Lpm max flow
- Honda GX200, recoil start
- Interpump W154 pump & gearbox
- Mounted on baseplate
- 60°C max fluid temperature
- Unloader valve - 3/8"BSPF outlet
- Inline suction filter - 3/4" hose barb
- Return to tank bypass - 15mm hose barb
- 620L x 400W x 360H, mm. 37Kg
- Not supplied with lance/hoses
Quick View- 150 Bar max pressure
- 14 Lpm max flow
- Honda GX200, recoil start
- Interpump W154 pump & gearbox
- Mounted on baseplate
- 60°C max fluid temperature
- Unloader valve – 3/8″BSPF outlet
- Inline suction filter – 3/4″ hose barb
- Return to tank bypass – 15mm hose barb
- 620L x 400W x 360H, mm. 37Kg
- Not supplied with lance/hoses
-
Honda/Interpump Petrol Engine Pump Unit
- 170 Bar max pressure
- 21 Lpm max flow
- Honda GX390, recoil start
- Interpump WS202 pump & gearbox
- Mounted on heavy duty skid
- 60°C max fluid temperature
- Unloader valve - 3/8"BSPF outlet
- Inline suction filter - 3/4" hose barb
- Return to tank bypass - 15mm hose barb
- Fitted with "Easystart" valve
- 720L x 460W x 500H, mm. 69Kg
- Not supplied with lance/hoses
Quick View- 170 Bar max pressure
- 21 Lpm max flow
- Honda GX390, recoil start
- Interpump WS202 pump & gearbox
- Mounted on heavy duty skid
- 60°C max fluid temperature
- Unloader valve – 3/8″BSPF outlet
- Inline suction filter – 3/4″ hose barb
- Return to tank bypass – 15mm hose barb
- Fitted with “Easystart” valve
- 720L x 460W x 500H, mm. 69Kg
- Not supplied with lance/hoses